Jewelry repair questions · Earrings & pendants

Brooch repair: can a broken pin or clasp be fixed?

Usually, yes. A jeweler can straighten a bent pin stem, tighten a loose joint, or fit a new pin, catch or safety catch while keeping heat away from stones, pearls and enamel. At JewelryRepair.com a brooch starts with a $19 evaluation, credited in full: the Mail-In Evaluation, or Antique & Heirloom Restoration for an antique or heirloom piece.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$19evaluation, credited in full toward the brooch repair you approve
$70left to pay after the $19 credit if the evaluation leads to an $89 Reset Loose Stone ($89 − $19)
$30UPS round trip per order, however many pieces share the box
50,000+repairs since 1989

The short version

  • Most brooch fastenings can be repaired. A bent pin can be straightened, a loose joint tightened, and a broken pin, catch or safety catch replaced.
  • The hard part is the heat. Reattaching a joint or catch means soldering on the back of the brooch, close to stones, pearls, enamel or cameos that may not tolerate it.
  • Old brooches deserve a light touch. On an antique or signed piece, keeping the original fittings where possible protects its character and value.
  • Here: brooch pins and catches aren't separate menu items, so a brooch starts with a $19 evaluation, credited in full, and you see an itemized quote before any work.

Prices

Service PriceWhat's included
Mail-In Evaluation $19The starting point for a modern, signed or costume brooch: the pin, joint, catch and every stone examined under magnification, photographed and quoted item by item. Approve all, some or none; a declined piece ships back with the findings.
Antique & Heirloom Restoration $19For an antique or heirloom brooch: choose "Brooch or pin" as the piece type. The metal is tested, worn joints and loose stones are mapped under magnification and patina is preserved; each step is quoted with photos before any work.
Reset Loose Stone $89One stone that has shifted, sunk, tilted or fallen out: the seat re-cut and the stone set level. If it came out, seal it in a small bag in the box.
Stone Tightening from $50Loose stones secured under 10x magnification, up to eight per order. Not bookable directly for a brooch: quoted as a step after the evaluation when it finds them.
Enamel Repair from $54Chipped enamel filled with color-matched enamel and polished flush. At least one color ($10) and one location ($10) are charged, so one chip in one color on silver is $54 ($34 + $10 + $10).

How a brooch fastening works, and how each part fails

A modern brooch usually has three working parts on its back:

  • The pin stem, the needle that goes through the fabric. Brepohl's goldsmithing text says it should be straight and pointed so it passes through cloth without snagging. It fails by bending, losing its point or snapping.
  • The joint, the small hinge the pin pivots in, usually held by a rivet. A well-made pin, Brepohl says, moves without rattling and opens at least 90 degrees. A worn rivet lets the pin wobble and miss the catch; a joint whose solder has failed comes off entirely.
  • The catch, an open hook or a safety catch with a small turning lever or sleeve. Catches wear open, bend or break off, and a stiff or loose safety stops locking.

Brepohl's standard is a pin that fits securely in the catch with enough tension to stay there. When a pin no longer springs into its catch, or pops out when you move, one of those parts has worn. If yours stays closed but tips forward when worn, that's a balance problem; see how to keep a brooch from drooping or falling off.

How a jeweler repairs each part

Brepohl's chapter on special repair work sets out the bench approach:

  • A bent pin is straightened with flat pliers, or laid on a steel block and tapped with a small hammer or plastic mallet without leaving marks.
  • A loose joint is tightened by tapping the rivet until it fits snugly. A worn rivet can be replaced with new wire of the same gauge.
  • A joint or catch that has come off is soldered back on. The pin comes out first so the heat doesn't anneal it, which would leave it soft instead of springy, and stones set in the front come out where they can.
  • A safety catch is soldered with very little flux and solder, because either can flow into the mechanism and seize it, with the heat aimed mainly at the brooch.

The simplest case is a pin that has only lost its spring: when nothing is cracked, a jeweler bends it carefully to restore the tension and checks that it seats firmly in the catch.

Where a joint sits close to something fragile, a laser weld is the alternative to the torch, because it puts the heat into a pinpoint. A GIA article on gemstone durability notes that heat-sensitive stones such as emerald and tanzanite can be damaged by soldering near them, and GIA notes that pearls and shell cameos are porous organic materials that can be damaged even by the warmth of an ultrasonic cleaner, so torch heat near them is a real risk. Your quote says which method the bench will use.

Antique, signed and costume brooches

  • Antique and vintage pieces. Old metal can be brittle, and old solder joints hide under patina. That is what Antique & Heirloom Restoration is for: the metal is tested, the piece is mapped under magnification, and patina is preserved. If you'd rather keep an original pin or catch, say so; on a collectible piece, original fittings can matter. See how to tell if jewelry is antique or vintage.
  • Signed designer brooches. If it may be valuable, consider a Jewelry Appraisal (from $105) before any work changes it.
  • Costume brooches. Many are plated base metal with glued-in rhinestones, and plated pieces needing solder work go to a quote, because heat and plating don't mix; see whether costume jewelry can be repaired.

Can I fix a brooch pin myself?

Only the gentlest part. If a pin has a slight bend and nothing is cracked, easing it straight with smooth-jawed pliers is low risk. Beyond that, home repairs make the bench work harder:

  • Bending a pin back and forth work-hardens it at the bend until it cracks, and a snapped stem means a new pin.
  • Squeezing a catch with pliers can crack a brittle old catch or jam a safety mechanism.
  • Glue doesn't hold against the lever of a pin, ages and lets go, and has to be cleaned off before a proper solder joint can be made.
  • Soldering at home is the one to avoid on anything with stones, pearls, enamel or plating; see whether you can solder jewelry at home.

Until it's fixed, don't wear a brooch whose catch won't lock.

What it costs at JewelryRepair.com

One brooch needs a rivet tightened, another a joint resoldered beside enamel, so pricing works like this:

  • Book a $19 evaluation: the Mail-In Evaluation for a modern, signed or costume brooch, or Antique & Heirloom Restoration (piece type "Brooch or pin") for an antique or heirloom. Either way the $19 is credited in full toward the work you approve.
  • Get an itemized quote with photos, and approve all, some or none. A declined brooch ships back with the findings, and the $30 UPS round trip already covers the return.
  • Steps the quote may include: Reset Loose Stone, $89 flat for one stone; Stone Tightening from $50; Enamel Repair, $54 for one chip in one color on silver ($34 + $10 + $10).

$100 of UPS coverage is included each way; covering a $1,500 brooch for full value adds $35 (2.5% of the $1,400 above $100), and the shipping and insurance page has the rest. The work carries the 1-year workmanship guarantee from Sky Jewelry, family jewelers on Lenox Avenue with over 50,000 repairs since 1989.

Before you ship a brooch

  • Close the catch if it will close. If it won't, cover the point with a small piece of foam or folded tissue so it can't push through the padding.
  • Bag any loose parts: a pin that came off, a fallen stone, a broken catch.
  • Note any marks, signatures or earlier repairs in your order, and say what matters to you: original fittings, patina, or maximum security.
  • Pack it so it can't shift in a sturdy small box with nothing on the outside naming the contents, attach the prepaid label from your account, and drop it at any UPS location.

Questions

How much does it cost to fix a brooch pin?
It depends on what failed, so at JewelryRepair.com a brooch starts with a $19 evaluation, credited in full: the Mail-In Evaluation, or Antique & Heirloom Restoration for an antique or heirloom piece. A jeweler examines the pin, joint, catch and stones, then quotes each step with photos before any work; resetting a loose stone, for example, is $89 flat. UPS shipping is $30 round trip per order.
Can you replace the clasp on a vintage brooch?
Usually, yes. A worn or broken catch can often be repaired, or a new catch or safety catch soldered on, with the pin removed first so it keeps its spring and stones protected from the heat. On an antique or signed piece, repairing the original fitting can be the better choice for its value. At JewelryRepair.com that's decided after the $19 Antique & Heirloom Restoration evaluation, credited in full, with a photo quote.
Why won't my brooch pin stay closed?
Usually because the pin has lost its tension, the joint's rivet has worn so the pin wobbles, or the catch has worn open or bent. A well-made pin should seat securely in its catch with enough tension to stay there. Each cause is a small bench repair, but until it's done, don't wear the brooch, because one that pops open can fall away unnoticed.
Can a safety catch be added to an old brooch?
Often, yes. A safety catch with a small turning lever or sleeve can replace an open hook catch, soldered onto the back with care so flux and solder don't seize the mechanism. On a valuable antique you may prefer to keep the original catch and repair it. At JewelryRepair.com either route is quoted after the $19 evaluation; see also how to keep a brooch from falling off.
Is it worth repairing a costume brooch?
Sometimes. Costume brooches are often plated base metal with glued-in stones, so heat from soldering can damage the plating, and plated pieces needing solder work are quoted individually rather than priced from a menu. For a sentimental or collectible piece the repair can be well worth it; for an inexpensive one, compare the quote plus $30 round-trip shipping with replacing it.