Jewelry repair questions · Rings & sizing

Can a jeweler make an exact copy of a ring, for example a lost heirloom?

Usually, yes, though "exact" has limits. With the original in hand, a jeweler can mold or measure it; without it, the ring is rebuilt in CAD from photos and known measurements. A copy can match design, size, metal and stones, but not decades of wear or every stroke of hand engraving. At JewelryRepair.com it starts with a $10 estimate.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$10Custom Work & Modifications estimate to recreate a ring
$1503D Design & Rendering, credited toward fabrication, with two revision rounds
$250starting price for Hand Engraving, by free quote
50,000+repairs since 1989 by Sky Jewelry's family of jewelers

The short version

  • Yes, a jeweler can copy a ring, from the original or, if it's lost, from photos, measurements and any paperwork you have.
  • With the original: it can be molded and cast, or measured and modeled. A mold copies wear too, so a worn original is often better measured and rebuilt.
  • Without it: the ring is rebuilt in CAD from photos and the dimensions you know for certain.
  • What a copy can't match: decades of wear, the individual strokes of hand engraving, and antique stone cuts no modern stone matches off the shelf. A copy is a new ring, without the original maker's marks.
  • At JewelryRepair.com: Custom Work & Modifications starts with a $10 estimate, and 3D Design & Rendering is from $150, credited toward fabrication.

This page covers recreating a ring that's yours or your family's.

Prices

Service PriceWhat's included
Custom Work & Modifications $10Where every copy starts: send photos, sketches, an old appraisal and any measurements. Nothing ships yet. A jeweler reviews them and quotes the project line by line, with any honest trade-offs, before anything proceeds. Existing stones or gold can be reused or credited.
3D Design & Rendering $150For a copy rebuilt from photos, or one you want to see before it's made: a CAD model and photorealistic render, built around the real dimensions of any stone being reused, with two rounds of revisions. The $150 is credited toward fabrication and the files are yours.
Hand Engraving from $250New graver-cut lettering or ornament, or re-cutting worn antique engraving. For a lost original, send photos with the free quote request and the quote says how close it can come. Ornamental work adds $50 and metal surcharges (silver through platinum) run up to +$158; the free quote sets the exact price.
Metal Testing & Verification $15If the original or a matching piece survives: hallmarks checked and the metal and karat tested and documented, so the copy is made in the right metal.
Jewelry Appraisal from $105Documents a ring before it's ever lost: a written insurance-replacement-value appraisal with photographs, with stones measured in their settings, the metal tested, stamped marks verified, and construction and condition recorded. It's the best blueprint for a future copy.

Three ways a ring gets copied

  • Molding the original. Lost-wax casting, as Wikipedia describes it, starts with a mold made of the original model. In jewelry, a wax is injected into a rubber mold, cast in metal. The mold can be reused for multiple copies, limited only by its durability, which is how one ring becomes matching rings for several family members. The catch: a mold copies dents and worn engraving too, and needs the original in hand.
  • Measuring and modeling in CAD. The ring's width, thickness, profile and stone sizes are measured and rebuilt as a 3D model, which is then cast. This works from the original or from photos, and it lets worn details be restored rather than copied. At JewelryRepair.com, the 3D design is built around the measured dimensions of any heirloom stone being reused.
  • Fabricating by hand. Some rings, plain bands and simple settings among them, can be made at the bench from wire and sheet, soldered and shaped.

The method follows the ring. A plain band or a simple solitaire is straightforward any way; a pierced filigree mount, an engraved signet ring or a cluster of antique stones takes more judgment, and the quote says which route a jeweler recommends and why.

What a copy can match, and what it can't

  • Design, proportions and size: yes. The size can be set for the new wearer rather than copied from the original.
  • Metal: yes, when it's known. Stamps can be worn, wrong or missing, so if the original or a matching piece survives, test it; Metal Testing & Verification is $15 per item.
  • Stones: modern cuts in standard sizes, yes. Antique cuts such as old European, old mine and rose cuts were cut to standards no modern stone matches off the shelf, so they're matched from available stones, and you approve any stone and its price before it's set.
  • Hand engraving: the pattern and lettering, yes; the exact strokes, no. Hand engraving is cut with a graver, so its line swells and tapers like handwriting, and a new engraver cuts their own rendering of the design.
  • Wear and patina: no. A copy starts new.
  • Maker's marks and age: no. A copy is a new ring by a new maker. It can carry an inscription or a date inside, but it isn't the original.

If the original is lost: what to gather

The more a jeweler can measure, the less has to be guessed. Before you ask for a copy, collect:

  • Every photo you have, especially close-ups, side views that show the profile, and pictures on a hand, where the finger gives a sense of scale.
  • An old appraisal. Jewelers Mutual explains that an appraisal records the type and weight of the metal, the gemstones and their characteristics, and a detailed description with photographs. It's the closest thing to a blueprint.
  • The ring size, band width and stone size, from a receipt, an appraisal, a jeweler's record or a reliable memory. Anything known for certain anchors the rest.
  • A surviving partner piece: the matching band, the other ring of a set, or a relative's identical ring, which can be measured directly.
  • The engraving: the exact wording, dates and style of lettering.

Insured? Call your insurer before commissioning a copy. Jewelers Mutual notes that an appraisal's detailed description and photographs help a jeweler replace a lost piece with a new one of the same kind and quality; what your policy pays depends on its terms.

Not lost yet? Jewelers Mutual suggests photographing each piece of fine jewelry, with a close-up of its details and one with you in the picture, and keeping receipts and appraisals in the same place. That record is what makes a faithful copy possible later.

How a copy works at JewelryRepair.com

  • Estimate. Order the $10 Custom Work & Modifications estimate and add photos, sketches, an appraisal and measurements. Nothing ships yet.
  • Quote. A jeweler sends a line-by-line quote before anything proceeds, with any honest trade-offs, such as an antique stone cut that can only be approximated.
  • Design. For a copy rebuilt from photos, 3D Design & Rendering produces a CAD model and render with two rounds of revisions; the files belong to you, which helps if another copy is ever wanted.
  • Stones. Replacement stones are sourced and quoted separately, lab-grown options are offered where they fit, and your own stones can be reused for setting labor only.
  • Engraving. New hand engraving in the style of the original is quoted through Hand Engraving, from $250 by free quote, and the quote says how close it can come; machine engraving inside a band is Ring Engraving, from $60.
  • Your original, if you send it. It's photographed on arrival at the New York studio and again before it ships back, and travels by UPS with a signature both ways.

Copy, restore or redesign?

What it costs at JewelryRepair.com

Prices from the live repair pages, Nov 18, 2026. Making the ring itself is quoted per design, because the metal, weight, method and stones set the price. These are the fixed parts:

  • Custom Work & Modifications: a $10 estimate.
  • 3D Design & Rendering: from $150, credited toward fabrication; rush adds $50 ($200).
  • Hand Engraving: from $250 by free quote; ornamental work adds $50 ($300 before metal), and metal surcharges (silver through platinum) run up to +$158. The free quote sets the exact price.
  • Diamond setting labor on the copy: one center diamond from $65 and side diamonds $15 each on the Diamond Setting page. Diamonds you supply pay labor only; sourcing is quoted separately.
  • Jewelry Appraisal: from $105, to document a ring you still have, or the copy once it's made.

If you send an heirloom original, shipping is $30 round trip by UPS with $100 of coverage each way, and full-value cover for a ring worth $2,000 is $47.50 for both directions (2.5% of the $1,900 above $100). JewelryRepair.com is the mail-in service of Sky Jewelry, family jewelers on Lenox Avenue since 1989. Its New York studio has completed over 50,000 repairs since 1989.

Questions

Can a jeweler copy a ring from a picture?
Yes, if the photos show enough. The ring is rebuilt as a 3D model from the photos plus any known measurements, such as the ring size, band width or stone size, then cast. Side views and close-ups help most, and an old appraisal helps even more. At JewelryRepair.com that's 3D Design & Rendering, from $150 and credited toward fabrication, after a $10 Custom Work estimate.
How much does it cost to have a ring copied?
It depends on the metal, weight, stones and engraving, so each copy is quoted. At JewelryRepair.com the fixed starting points are a $10 Custom Work estimate, 3D Design & Rendering from $150 (credited toward fabrication), Hand Engraving from $250 by free quote, and diamond setting labor from $65 for a center stone. You see the line-by-line quote before anything proceeds.
Can I get copies of a family ring for each sibling?
Yes. A ring can be molded so the same model is cast several times; Wikipedia's article on lost-wax casting notes a mold can be reused for multiple copies, limited only by its durability. A CAD model works the same way, and at JewelryRepair.com the 3D design files belong to you. Each copy can be made in its wearer's size, and the original stays with whoever keeps it.
Do I have to send the original ring?
Not always. A copy can be built from photos and measurements, but the original in hand gives exact dimensions, metal and stone sizes, and it's required if the ring is to be molded. If you send it to JewelryRepair.com, it's photographed on arrival and before it ships back, travels by UPS with a signature both ways, and can be covered for its full value up to $10,000.
Will a copy look old like the original?
Not exactly. A copy starts new: crisp edges, full-thickness metal and a fresh finish, without the softened details and patina that decades of wear gave the original. Hand engraving is recut by a new hand, and antique stone cuts are matched from available stones. A mold copies the surface as it is, wear included, but it also copies dents and thin spots.
Will insurance pay to recreate a lost heirloom ring?
Often, if the ring was insured, though what a policy pays depends on its terms. Jewelers Mutual notes that an appraisal's detailed description and photographs help a jeweler replace a lost piece with a new one of the same kind and quality. Call your insurer before commissioning a copy yourself, and keep current appraisals and photos of rings you still have.