Jewelry repair questions · Earrings & pendants

What can I do with a single earring after losing its mate?

Wear it on its own, turn it into a pendant, charm or ring, pair it with another orphan, reuse its stone and gold, or have a match made. A stud usually becomes a pendant once the post is removed and a bail is added. At JewelryRepair.com, conversions start with a $10 Custom Work estimate from your photos.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$10Custom Work estimate: a jeweler quotes the conversion from your photos before anything ships
$69Charm & Pendant Soldering: a drop earring fixed to a bracelet or chain as a charm that still swings
$20a new post on the earring you still have, sterling silver ($30 - $10 for a single)
50,000+repairs since 1989 by Sky Jewelry's family of jewelers

The short version

  • Wear it alone. No work needed, though the survivor may need a better back so you don't lose it too.
  • A pendant. A stud loses its post and gains a bail; a drop loses its hook and hangs from a soldered jump ring.
  • A charm. A small drop or huggie fixed to a bracelet or charm chain.
  • A ring. The earring's stone reset into a ring, or the earring's face built onto a band. Bigger work, always quoted.
  • Pair it with another orphan as a deliberate mismatched pair, or combine several into one pendant.
  • Reuse the materials. The stone and gold can go into a new piece, or be credited toward one.
  • Make a match. If the pair mattered, the survivor is the model for a new mate. See replacing one lost earring.

Prices

Service PriceWhat's included
Custom Work & Modifications $10Stud or drop to pendant, earring to ring, combining orphan earrings, resetting the stone, or matching the lost one. Existing stones and gold can be reused or credited; you get a line-by-line quote before anything ships.
Charm & Pendant Soldering $69A drop or charm-style earring attached permanently to a bracelet or chain by soldering or laser-welding the link closed, so it still swings.
Jump Ring Repair from $19The small ring a converted drop hangs from, soldered closed or replaced with a heavier one so it can't slip off the chain. $19 in silver, $31 in 14K yellow gold ($19 + $7 + $5).
Bail Repair from $39Restores or replaces an existing pendant bail so it hangs straight: $39 in silver, $63 in 14K yellow gold ($39 + $20 + $4). A first bail on a stud is quoted through Custom Work.
Earring Post Repair from $30To keep wearing the survivor: a worn or bent post replaced by soldering or laser welding, never glue. A single stud in sterling silver is $20; in 14K yellow gold, $30 ($30 + $6 + $4 - $10).
3D Design & Rendering $150A CAD design and photorealistic render of a new ring or pendant built around the earring's stone, with two revision rounds. The $150 is credited toward making it.

Before you change it: three things to check

  • Insurance. If the pair is insured, call before you alter anything. Property policies can include a pair or set clause; as IRMI, the insurance-reference publisher, defines it, the insurer can repair or replace part of a pair to restore its value, or pay the difference in actual cash value before and after the loss. The surviving earring is the evidence and the model, so keep it unaltered until the claim is settled. See how jewelry insurance works.
  • What it's made of. Solid gold, silver or platinum can be soldered and reworked. Plated or base-metal costume earrings often can't take solder at all; see can costume jewelry be repaired? If the post or back isn't stamped, Metal Testing & Verification is $15.
  • What the stone is worth. For a diamond or fine gemstone earring, a written appraisal before conversion records the stone, so you know what you're building around. A Jewelry Appraisal is $105.

And photograph the survivor from the front, back and side with a ruler beside it. If you later decide on a match, those photos and measurements are what a jeweler works from.

How each conversion is done

Stud to pendant. At the bench, the post is removed flush at its pad and the spot is cleaned back to bare metal, the same way a broken post is removed before a new one goes on. A bail is then soldered or laser-welded to the back, above the earring's balance point so it hangs straight. How easy that is depends on the back: a flat pad or a cluster gives the bail something solid to attach to, while a small solitaire in an open basket offers less, and the jeweler will say how they'd handle it. Stones near the join matter. A 1987 Gems & Gemology article on gemstone durability notes that heat-sensitive stones such as emerald, tsavorite and tanzanite can be damaged by soldering near them. That's why our bench uses a laser, with its pinpoint heat, close to stones. See adding a bail to a pendant.

Drop or dangle to pendant. Many drops already end in a loop where the hook attached. The hook comes off, a jump ring joins the loop to the chain or a bail, and the jump ring is soldered shut so it can't pull open. A long drop adds to how low the pendant sits.

Hoop. A single small hoop or huggie can hang on a chain as is, or be fixed to a bracelet as a charm. A hinged hoop that won't stay closed is a Hinge Repair, from $45 for earrings. See fixing a hoop that won't close.

Earring to ring. Either the stone comes out and is set into a ring mounting, or the earring's face is mounted on a band built underneath it. The second only works for a flat, sturdy earring that sits low enough to wear on a hand. Both are quoted custom work.

Combining orphans. Two or three single earrings in the same metal can become one cluster pendant or brooch, or a deliberately mismatched pair with matching backs. The metal from parts you no longer need can be credited.

Can I do it myself?

For an inexpensive or costume earring, yes. A metalsmith answering readers for the bead-supply house Fire Mountain Gems, on converting post earrings into dangles, lists three home methods that also give a single earring a hanging point:

  • Clip off the post and glue the front to a glue-on bail. The easiest, and the right choice for plated pieces that can't take heat. Adhesive ages, so check it now and then.
  • Drill the pad. If the post sits on a flat metal pad, a hole drilled or punched through the pad becomes the hanging point.
  • Turn the post into a loop and hang it from a jump ring or an ear wire, which also turns a stud into a drop earring.

For gold, platinum or a valuable stone, use a jeweler: clipping a gold post wastes reusable metal, drilling can crack a thin pad or chip a nearby stone, and glue on fine jewelry fails where you can't see it. Never use a torch near stones or pearls; see can I solder jewelry at home?

What it costs at JewelryRepair.com

Live prices as of Nov 18, 2026:

  • Any conversion: order the Custom Work & Modifications estimate, $10, and add photos of the earring with a ruler for scale, plus what you'd like it to become and the chain you'll wear. Nothing ships yet. A jeweler reviews it and sends an itemized quote, including any honest trade-offs, before anything proceeds.
  • A charm on a bracelet: Charm & Pendant Soldering is $69; the charm still swings.
  • The bail: Bail Repair restores or replaces an existing pendant bail, $39 in silver, $63 in 14K yellow gold ($39 + $20 + $4). A stud has no bail yet, so fitting its first one is quoted through Custom Work, because the post has to come off first.
  • The loop a drop hangs from: Jump Ring Repair, $19 in silver, $31 in 14K yellow gold ($19 + $7 + $5).
  • Keeping the survivor safe to wear: Earring Post Repair is priced per pair, $10 less for a single: $20 for one sterling silver stud ($30 - $10), $30 in 14K yellow gold ($30 + $6 + $4 - $10). The mate may have fallen out because of a worn post or a loose friction back; see the most secure earring backs.
  • A new ring or pendant designed around the stone: 3D Design & Rendering, from $150, credited toward making it.
  • Setting the earring's stone: setting labor for a diamond you supply is listed on Diamond Setting, from $65 for one center diamond in silver; the mounting itself is part of the custom quote.

Send the survivor alone or with the orphans you want combined: one box ships for $30 round trip by UPS, with $100 of coverage each way. Insuring a $2,500 diamond earring at full value adds $60 (2.5% of the $2,400 above $100), covering both directions. The earring is photographed on arrival in New York and before return, and the conversion, checked by a second jeweler, carries a 1-year workmanship guarantee. Sky Jewelry, family jewelers on Lenox Avenue, has done over 50,000 repairs since 1989; JewelryRepair.com is its mail-in service.

Questions

Can a jeweler turn one earring into a necklace?
Usually, yes. A stud has its post removed and a bail added to the back above its balance point; a drop earring loses its hook and hangs from a jump ring soldered shut. Stones near the join and plated metal change the method. At JewelryRepair.com the conversion is quoted from your photos through a $10 Custom Work estimate before anything ships.
How do you turn a stud earring into a pendant?
Remove the post and give the earring a hanging point. A jeweler takes the post off flush at its pad and solders or laser-welds a bail to the back. For a costume piece, a Fire Mountain Gems metalsmith's hanging-point method, from an answer on converting posts to dangles, is to clip the post and glue the front to a glue-on bail. For gold or a real stone, use a jeweler; here it starts with a $10 estimate.
Can you turn an earring into a ring?
Sometimes. The stone can be taken out and set into a ring mounting, or a flat, sturdy earring can be mounted on a band built underneath it. A dangling or very domed earring usually isn't a good candidate. Both are custom work: at JewelryRepair.com the $10 estimate gets you an itemized quote, and 3D Design & Rendering, from $150 and credited toward making it, shows the ring first.
What can I do with one diamond stud?
Reset it as a solitaire pendant, set it into a ring, or have a matching stud made. Check your insurance first: under a pair or set clause, an insurer may restore the pair or pay the loss in value, and the surviving stud is what they'll measure against. A written appraisal at JewelryRepair.com is $105; conversions start with a $10 Custom Work estimate.
Is it OK to wear just one earring?
Yes. A single earring, worn alone or with a small stud in the other ear, is a look in its own right. The practical point is security: if the mate fell out, check the survivor's post and back. A new post on a single sterling silver stud is $20 at JewelryRepair.com ($30 per pair, $10 less for one), soldered or laser-welded, never glued.