Repair questions · Earrings & pendants

Can regular stud earrings be converted to flat backs?

Sometimes, but it isn't a back swap: on a flat back the disc is part of a hollow post, so a jeweler must replace your stud's post with a pin that fits that post. At JewelryRepair.com it starts with a $10 Custom Work estimate from photos, or a $19 Mail-In Evaluation, credited in full, in hand.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$10Custom Work estimate from photos; nothing ships until you've seen the quote
$70Earring Back Conversion to screwbacks, sterling silver ($40 + $30)
$19Mail-In Evaluation in hand, credited in full toward the work you approve
50,000+repairs since 1989 by Sky Jewelry's family of jewelers

The short version

  • What a flat back is: a labret-style stud. A hollow post with a flat disc at one end goes through the ear from behind, and the decorative front attaches to it with a pin.
  • Why you can't just swap the back: on a regular stud the post is solid and soldered to the setting, and the back slides or screws onto it. On a flat back the disc is on the post, so your stud's post has to go and a pin that fits the flat-back post takes its place.
  • Is it possible? Often, on a stud with a sound setting and a flat pad behind it. It's precise work, because the pin has to fit the post exactly.
  • At JewelryRepair.com: flat back isn't one of the listed Earring Back Conversion styles, so it starts with a $10 Custom Work estimate from photos, or a $19 Mail-In Evaluation, credited in full, if the pair should be seen in hand. Neither is a promise that it can be done.
  • If you want security more than flatness, a screwback conversion is $70 in sterling silver.
  • New piercing? Ask your piercer first; jewelry for a healing piercing is a different standard.

Prices

Service PriceWhat's included
Custom Work & Modifications $10For a flat-back conversion: send photos of the studs (front, back and side) and details of the flat-back posts you want to wear. A jeweler reviews whether the setting can take a new pin and quotes the work before anything proceeds.
Earring Back Conversion from $40The listed styles: stick, screwback, wire, leverback and omega. Old fitting removed cleanly, new post and back soldered on, earring untouched. Screwback in 14K yellow gold $136 ($40 + $55 + $11 + $30).
Earring Post Repair from $30A bent, snapped or worn post replaced in your metal, soldered or laser-welded, never glued. Single earring $20; 14K yellow gold stick posts $40 a pair ($30 + $6 + $4).
Mail-In Evaluation $19If you'd rather the pair be examined in hand: under magnification, with an itemized quote and photos, credited in full toward the work you approve.

How flat-back earrings are built

Flat backs come from body jewelry, where they're called labret studs. The post enters the ear from behind, the flat disc rests against the back of the lobe, and the top goes on from the front. There are two common ways the top attaches:

  • Internally threaded. The threads are on the top's short pin, which screws into the hollow post, so the part of the post that passes through your ear stays smooth. Piercing studios recommend this style for new piercings for that reason.
  • Threadless, or press-fit. The top has a plain pin that pushes into the post. There's no screwing; grip comes from bending the pin slightly, and you adjust how tight it is by changing the bend.

Size matters more than with a regular back. Atolea's guide to earring gauges puts standard consumer earrings at 20 gauge and calls 18 gauge common in higher-quality jewelry; by the wire-gauge table those are about 0.81 mm and 1.02 mm. Flat-back posts come in more than one gauge, so match the one your piercing already wears. Because the disc is fixed, the post can't slide to suit your ear the way a friction back slides along a regular post, so its thickness and length have to suit your piercing. That's also why a conversion is built around the specific flat-back posts you plan to wear: the pin is made for them.

What a conversion involves at the bench

Converting a regular stud is a modification, not a back swap. In general terms, a jeweler would:

  • Check the stud first: the metal, how the existing post is attached, how close the stones sit to it, and whether the pad behind the setting is sound and flat enough to take a new pin.
  • Remove the old post flush at its pad and clean the surface back to bare metal, the same first step as an Earring Post Repair.
  • Attach a pin sized for your flat-back post, perpendicular and true. On stone-set pieces a laser weld is used where heat has to stay away from the stones, because the weld happens at a pinpoint.
  • Fit it to the post. A threaded pin has to match the thread of the exact post it will screw into; a threadless pin needs the right diameter and a bend that grips without forcing.
  • Test, clean and check. The top should seat fully, sit straight and come off only when you mean it to.

Because the parts are chosen to fit someone else's post system, and because every stud is built differently behind the setting, this isn't sold at a fixed price here. Whether we can do it for your pair, and what it costs, is settled at the estimate, before anything ships.

When it's a bad idea, and the alternatives

Some earrings shouldn't be converted:

  • Pearl studs, where the pearl is usually drilled and fixed onto the post itself. Changing the post means dealing with the pearl, and pearls can't take heat.
  • Tiny settings with no flat area behind them for a new pin.
  • Drops, hoops, leverbacks and clip-ons, which aren't studs to begin with.
  • Antique or signed pieces where the original fittings are part of the value.

If what you're after is comfort or security rather than the flat-back system itself, there are simpler routes:

What it costs at JewelryRepair.com

Prices from the live repair pages, Nov 18, 2026. Each repair price includes a clean and polish and the 1-year workmanship guarantee; the estimate and the evaluation are not repairs.

  • Custom Work & Modifications: a $10 estimate. Order it and add photos of the studs and details of the flat-back posts you want; nothing ships yet. A jeweler reviews them and sends a quote, line by line, and nothing proceeds until you approve it.
  • Earring Back Conversion (listed styles): in sterling silver, screwback $70 ($40 + $30), leverback $80 ($40 + $40), omega $100 ($40 + $60). In 14K yellow gold, screwback $136 ($40 + $55 gold + $11 for 14K + $30); in 14K white or rose gold, $142 ($40 + $61 + $11 + $30).
  • Earring Post Repair (priced per pair): $30 for sterling stick posts, $20 for one earring; $40 in 14K yellow gold ($30 + $6 + $4).
  • Mail-In Evaluation: $19, credited in full, if you'd rather the jeweler see the pair in hand.

Before you ship

  • Decide on the posts first: threaded or threadless, the gauge that matches your piercing, and a length that suits your lobe.
  • Healed piercings only. Piercing studios recommend internally threaded jewelry, chosen by the piercer, for a new piercing; a converted fine-jewelry stud isn't a substitute for it.
  • Send both earrings, so the pair comes back matched, sealed in a small bag inside any sturdy small box with nothing on the outside naming the contents.
  • Ship with the prepaid UPS label from your account, dropped at any UPS location. Shipping is $30 round trip per order with $100 of coverage each way. For diamond studs, full value can be insured up to $10,000 for 2.5% of the value above $100, covering both directions: a $2,500 pair costs $60 to cover (2.5% of $2,400), from UPS's first scan until signed for.

JewelryRepair.com is the mail-in repair service of Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989. Your earrings are photographed on arrival at the New York studio and again before they ship back, a bench jeweler does the work and a second jeweler checks it, and they come back in a plain box, signed for at your door.

Questions

Can you turn any earring into a flat back?
No. It works best on a stud with a sound setting and a flat pad behind it where a new pin can be attached. Drops, hoops, leverbacks and most pearl studs, where the pearl sits on the post itself, usually aren't candidates. Flat back isn't a listed conversion at JewelryRepair.com, so it starts with a $10 Custom Work estimate from photos, or a $19 Mail-In Evaluation, credited in full, if the pair should be examined in hand.
What's the difference between threaded and threadless flat backs?
How the front attaches. On an internally threaded flat back, the decorative top has a threaded pin that screws into the hollow post, which keeps the threads off the part that passes through your ear. On a threadless, or press-fit, flat back the top's plain pin pushes into the post and is held by a slight bend you can adjust. Either way, the pin has to fit the post exactly.
Are flat back earrings better for sleeping?
Many people find them more comfortable, because a smooth disc sits behind the lobe instead of a post end and a bulky back. Seattle Children's still advises taking earrings out at bedtime so the piercing gets air overnight. If you sleep in studs anyway, a secure back that sits close to the lobe beats a loose butterfly back; see our answer on earring backs for sleeping.
Can a gold or diamond stud be converted to a flat back?
Possibly, if the setting has room for a new pin and the stones can be kept away from heat; a laser weld puts the heat at a pinpoint. The old post has to come off first, so it's worth an expert look before you buy posts. Send photos for the $10 Custom Work estimate. If security is the goal, a screwback conversion in 14K yellow gold is $136.
Can I convert my earrings to flat backs myself?
Not safely on fine jewelry. It means cutting off the post and attaching a new pin square to the setting with solder or a laser weld. Glue doesn't hold: a glued pin is held by a tiny surface while it's pushed, pulled and twisted every time you put the earring in, and a glued post has to be cleaned back to bare metal before a jeweler can solder it properly.
What gauge are flat back earrings?
Match the gauge of your piercing rather than assume one size, because flat-back posts are made in more than one gauge. Atolea's earring gauge guide puts standard earrings at 20 gauge, about 0.81 mm by the wire-gauge table, with 18 gauge, about 1.02 mm, common in higher-quality jewelry. Length matters too, because the disc can't slide along the post to fit your lobe the way a friction back can.