Jewelry repair questions · Stones & settings

Can missing marcasite stones be replaced, and how do you clean marcasite jewelry safely?

Yes, missing marcasites can usually be replaced: tiny pyrite stones are matched in size and set back the way the piece was made. Clean marcasite dry with a soft brush and polish only the silver; skip soaking, dips and ultrasonic cleaners. At JewelryRepair.com, setting labor for one stone in silver starts at $23; glued pieces start with the $19 Mail-In Evaluation.

From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )

$23Gemstone Replacement setting labor for one stone in sterling silver; each additional stone +$18
6 to 6.5pyrite's Mohs hardness; it is also brittle, so the tiny facets chip
$19Antique & Heirloom Restoration evaluation, credited in full
50,000+repairs since 1989 by Sky Jewelry's family of jewelers

The short version

  • It's pyrite, not marcasite. The stones are small faceted pieces of pyrite, iron sulfide, usually set in silver. True marcasite is too unstable for jewelry.
  • Replacing them is usually straightforward if the piece is sterling silver and the seats are sound: a jeweler matches the diameter and sets a new stone the way the old ones were held.
  • Bead-set or glued? Set pieces hold the stones with tiny raised beads of metal; cheaper costume pieces glue them, and some silver pieces were glued too. The method decides the repair.
  • Clean it dry. A soft brush between the stones and a polishing cloth on the raised silver. No soaking, no silver dip, no ultrasonic.
  • Store it dry. Pyrite slowly breaks down with long exposure to damp air.
  • Check for loose stones before cleaning, not after. A stone that moves will leave in the sink.

Prices

Service PriceWhat's included
Gemstone Replacement from $23Missing stones matched and sourced, with options and their price sent for approval before setting; if none suits, nothing is owed for stones. Sterling silver: one stone $23, three stones $59 ($23 + 2 x $18), or $65 bead-set, which the configurator calls Pavé (+$6).
Gemstone Replacement & Setting from $23 for one stoneSetting labor only, for marcasites you already have, such as stones that fell out and were saved. One stone in sterling silver is $23 ($5 base + $18 for the stone).
Stone Tightening from $50Loose stones tightened under 10x magnification, up to eight per order, $50 in silver. Best for stones still in their seats that rattle or shift.
Antique & Heirloom Restoration $19For a vintage piece with many missing or glued stones, worn silver or a broken pin: every stone and joint mapped under magnification and each step quoted with photos before any work. Credited in full.

What marcasite jewelry actually is

The name is a trade misnomer. Wikipedia's article on marcasite jewellery explains that it's made with cut and polished pieces of pyrite, which is more stable and less brittle than the mineral marcasite, and Gemworld International's Gem Focus on pyrite says commonly called marcasite jewelry is in fact set with pyrite. Both minerals are iron disulfide; true marcasite breaks down too readily to wear.

Pyrite rates 6 to 6.5 on the Mohs scale, so it resists everyday scratches, but it's brittle: a sharp knock chips the edges of the tiny facets, and a supplier of replacement stones notes that they crack and chip easily under pressure. The stones themselves are small: one supplier sells loose replacement marcasites as round rose cuts, a six-sided faceted top with a flat bottom, in diameters from 1 to 2 millimeters.

The setting is usually silver. Wikipedia notes that marcasite jewelry is frequently made by setting faceted pyrite into silver, while cheaper costume jewelry glues the stones in. Look for a 925 or sterling mark; if there isn't one, see what 925 and other stamps mean.

How missing marcasites are replaced

Jewelers argue about how marcasite was traditionally held. On the Ganoksin jewelers' forum, a diamond setter insists the small beads around each stone are there for one purpose, to hold it; others, with their own repair experience, say vintage marcasite was customarily glued and the beads are mostly decorative. A jeweler looks under magnification and repairs it the way that piece was made:

  • Clear the seat. Old glue comes out first: a repairer on the same forum cleans it out with a knife point before putting a stone back.
  • Match the stone. Diameter first, then height: a stone that's too thick is hard to hold with beads, and it stands proud of its neighbors.
  • Set it. On a bead-set piece, the beads are eased back over the new stone gently, because silver is soft and pyrite is brittle. On a glued piece, a small amount of adhesive goes into the clean seat and the excess is removed before it cures.
  • Check the neighbors. One repairer on the forum finds five or six more stones on a piece that need attention whenever one is missing. Losing one usually means others are loose.

When it isn't worth it: a plated base-metal piece with dozens of glued stones may cost more to restore than it's worth; see can costume jewelry be repaired? A stone that fell out and was saved can go back in, so keep it in a small sealed bag. And skip household glue: every trace of it has to be scraped out before a stone can be set properly. See can I glue a stone back in?

How to clean marcasite safely

  • Brush it dry. A soft, dry toothbrush or makeup brush clears dust and lint from between the stones.
  • Polish the silver, not the stones. A silver polishing cloth on the raised metal brightens it. Leave the dark tarnish in the recesses around the stones: it's what gives old marcasite its contrast. See how to use a silver polishing cloth.
  • For grime, a cotton swab barely damp with water and a drop of mild soap, worked over the metal and dried at once. Never let water pool around the stones.
  • No ultrasonic cleaners or steam. Jewelers on Ganoksin report that ultrasonic cleaning shakes marcasites out of their seats, and that epoxies soften with long exposure to water and heat.
  • No silver dip, vinegar or lemon. A jeweler on the same forum notes the stones may be attacked by pickling acid. Dips are acid solutions too; see is silver dip safe?
  • No baking soda paste or soaking. Both put water and rubbing exactly where glued stones are weakest.

Can marcasite get wet, and how should it be stored?

A splash won't ruin it, but long dampness is the thing to avoid. Wikipedia's article on pyrite explains that pyrite in contact with air and water ultimately decomposes into iron oxyhydroxides and sulfuric acid. Museums know this as pyrite decay: in a Ganoksin article on the problem in mineral and fossil collections, the decay is described as an oxidation triggered by humidity in the air, and compact, dense pyrite may show it only as surface tarnish. The same forum thread on setting marcasite makes the practical point: keep it in a dry, moisture-free place.

  • Take marcasite off for swimming, showers and washing up.
  • Dry it if it gets wet, and leave it out to air before boxing it.
  • Store it in a closed box or pouch away from bathrooms, ideally with an anti-tarnish strip for the silver.
  • Keep it apart from harder stones that can chip the facets.

What it costs at JewelryRepair.com

Sterling silver prices on the live repair pages, Nov 18, 2026:

  • A few missing stones: Gemstone Replacement covers matching and sourcing, with options and their price sent for your approval before setting. Setting labor is $23 for one stone and $18 for each additional stone, so three stones are $59 ($23 + $18 + $18). For bead-set stones, choose the Pavé setting style, the bead-set option, +$6: three stones are then $65. A jeweler confirms the style at intake.
  • Stones you saved: Gemstone Replacement & Setting is the same setting labor without sourcing: $23 for one stone ($5 + $18).
  • Loose but still there: Stone Tightening, $50, up to eight stones.
  • A vintage piece with many problems, glued stones, or anything you're unsure of: Antique & Heirloom Restoration or the Mail-In Evaluation, $19, credited in full, with an itemized quote and photos before any work.
  • Cleaning: every repair includes a clean and polish. Our standalone Jewelry Spa uses an ultrasonic bath and steam, which marcasite should avoid, so don't book it on its own for a marcasite piece; say it's marcasite in your order notes so the jeweler knows the stones are pyrite.

Any saved stones travel in a sealed bag inside the same box. Return UPS shipping is included in the $30 round trip, with $100 of coverage each way; covering a $500 brooch at full value adds $10 (2.5% of the $400 above $100) for both legs. Photos taken on arrival in New York record every empty seat before work starts, a second jeweler checks the setting, and the work has a 1-year workmanship guarantee. Since 1989 the Sky Jewelry family, jewelers on Lenox Avenue, has completed over 50,000 repairs.

Questions

Can you buy replacement marcasite stones?
Yes. Loose marcasites, which are pyrite, are sold by jewelry suppliers; one lists round rose cuts from 1 to 2 millimeters across, and the right size is measured from the empty seat, not guessed. They chip easily, so setting them takes care. At JewelryRepair.com, Gemstone Replacement matches and sources the stones for your approval, and setting labor is $23 for one stone in sterling silver.
Can you put marcasite jewelry in an ultrasonic cleaner?
No. Jewelers on the Ganoksin forum report that ultrasonic cleaning shakes marcasites out of their seats, and glued stones loosen as the adhesive softens in warm water. Steam is no better. Clean marcasite dry with a soft brush, polish only the silver with a polishing cloth, and if stones are already loose, have them tightened: Stone Tightening is $50 in silver here.
How do you clean marcasite jewelry with baking soda or vinegar?
Better not to. Vinegar is an acid, and jewelers note marcasite stones can be attacked by acid; a baking soda paste means water and scrubbing around stones that may be glued. Use a dry soft brush between the stones and a silver polishing cloth on the raised metal instead. For heavy grime, a barely damp cotton swab on the metal, dried right away.
Why is my marcasite jewelry turning dark?
Usually it's the silver tarnishing, not the stones. Silver darkens from sulfur in the air, and the recesses around the stones stay darkest, which is part of marcasite's look. Polish the raised silver with a cloth. If the stones themselves look dull or rusty-brown after damp storage, the pyrite may be oxidizing; keep it dry and have a jeweler look. An evaluation here is $19.
Is marcasite jewelry worth repairing?
Usually, if it's sterling silver and you love it. Setting labor at JewelryRepair.com is $18 per stone after the first ($23 for one, $59 for three in silver), plus the stones' price, which you approve before setting. A plated costume piece with many glued stones may not be worth it. If you're unsure, the $19 Mail-In Evaluation gets you an itemized quote first.