Jewelry repair questions · Chains, clasps & bracelets
How do you clean and polish a gold chain at home?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Use: warm water, a few drops of mild dish soap, a soft toothbrush kept for jewelry, two bowls and a soft, lint-free cloth.
- Work along the chain, never across it, and never wring, ball up or twist a wet chain. That's how flat chains kink.
- Dry it completely, especially a hollow chain, which can hold water inside its links.
- Avoid: toothpaste and other abrasives, chlorine bleach and pool water, and pins or needles to pick at grime.
- If it stays dark after a wash, it's either tarnish on the alloy, which a gold polishing cloth or a professional polish removes, or plating worn through, which needs re-plating.
Prices
| Service | Price | What's included |
|---|---|---|
| Jewelry Spa | from $44 | Ultrasonic bath, steam and hand polish with a written inspection report. A chain is $71 in 14K yellow gold ($44 + $12 necklace + $10 yellow gold + $5 14K), $78 in 18K yellow and $80 in 14K white. |
| Jewelry Polishing | from $30 | Scratches worked out with progressively finer compounds. A 14K yellow gold necklace is $130 ($30 + $75 + $17 + $8); 18K is $138. |
| Gold Plating | from $60 | For plated chains worn through to the base metal, at flash plating: a necklace is $223 on brass ($60 + $50 + $113), $290 on copper ($60 + $50 + $180) or $110 on sterling (vermeil). A thicker 1 to 2 micron layer adds $250 and lasts longer on a chain worn daily. |
| Metal Testing & Verification | $15 | Hallmarks checked; metal and karat tested and documented, so you know whether the chain is solid gold or plated. |
| Clasp Replacement | from $48 | For a clasp that cleaning shows has lost its snap: a new spring ring, lobster or box clasp matched to the chain and soldered on, or the old one repaired when it's salvageable. |
Before you start: three checks
- Is it solid gold? Look near the clasp for a karat stamp: 10K or 417, 14K or 585, 18K or 750. Plated chains carry a thin gold layer over another metal, and scrubbing or polishing takes that layer off. Unmarked or unsure? Metal Testing & Verification is $15 per item if you only want the answer; inside a repair, choosing "not sure" for the metal means it's tested at no charge.
- Is it hollow? A chain that feels light for its thickness, common in rope and some Cuban and herringbone styles, may be hollow. Keep its soak short and dry it thoroughly, and never squeeze it with pliers or tools, because hollow links dent.
- Is anything weak? Before you brush, check the clasp snaps shut, the small ring joining it to the chain is closed, and no link looks thin or stretched. Most wear on a chain happens where the clasp joins it, and brushing can finish off a link that's already failing.
Step by step: washing a gold chain at home
- 1. Take off the pendant. Clean it separately if it's set with pearls or a porous stone such as turquoise or coral. GIA calls warm water with a few drops of mild dish soap the safest choice for gold set with delicate or porous gems or pearls, and says porous gems and pearls should be kept away from chemicals. Wipe them clean rather than leaving them in the bowl.
- 2. Fasten the clasp. Close it so the chain stays in one loop and can't knot itself in the water.
- 3. Soak for a few minutes. Use a bowl of warm water with a few drops of mild dish soap, to soften the lotion, skin oil and soap residue packed between the links.
- 4. Brush along the length. Lay a section across your palm and work a soft toothbrush, one reserved for jewelry as GIA advises, along the links in one direction. On a rope chain, follow the twist.
- 5. Rinse in a second bowl. Use a bowl of clean water, not a running tap over an open drain, where a fine chain can slip away.
- 6. Dry it flat. Press the chain gently inside a soft cloth, then lay it straight or in a loose coil on a dry towel until every link is dry. Give a hollow chain extra time.
- 7. Buff. Fold a soft cloth, or a jewelry polishing cloth made for gold, over the chain and draw the chain through it a few inches at a time. That brings up the shine and lifts light tarnish; it won't remove scratches.
Between washes
Between washes, GIA notes it's always safe to wipe jewelry with a soft cloth to remove dust and oils. For a chain, draw it along its length through the cloth when you take it off, and store it hung or laid straight.
Chain by chain: what needs a lighter touch
- Herringbone and snake chains are made of flat, tightly fitted links that kink when bent sharply, and a kink rarely lies flat again. Keep them straight the whole time, brush lightly along the length, and dry them flat. If one already has a crease, see whether a kinked herringbone chain can be repaired.
- Rope chains collect grime in the spiral grooves, which often reads as dark lines. That's usually packed residue rather than tarnish, and brushing along the twist lifts it.
- Cuban, curb and Franco chains are heavy and interlocking, and residue builds where links rub. Flex the chain gently in the soapy water so the joints open, then brush.
- Box chains have square links that hold water; shake gently after rinsing and give them time to dry.
- Fine cable and ball chains knot easily. Keep the clasp fastened, don't swirl them in the bowl, and if one does knot, see how to untangle a knotted chain before you pull on it.
Why a gold chain looks tarnished, dark or black
Pure gold doesn't tarnish, but a gold chain isn't pure gold. Karat counts parts of gold in 24: 18K is 75% gold, 14K about 58% and 10K about 42%, which is why they're stamped 750, 585 and 417. The rest is alloy, usually including copper and silver, and that's the part that reacts.
The International Gem Society's explanation is written about the black mark gold can leave on skin: chloride-rich sweat, sometimes with sulfides, attacks the copper and silver in lower-karat alloys and forms dark compounds that rubbing smears. A neck chain is the piece that lives in those conditions, lying in sweat and shifting with every turn of the head, and 18K, with less copper, is slower to do it than 14K. A wash lifts residue; a dark layer that stays after washing is tarnish on the alloy, which a gold polishing cloth or a professional polish takes off. Taking the chain off for workouts and hot days slows it down. For the chemistry in full, see does real gold tarnish?
If dark, coppery or greenish patches won't wash off, the chain may be gold-plated and worn through to the base metal. No cleaner brings plating back. Gold Plating does. If you book Gold Plating and choose "Other / not sure" for the base metal, the metal is tested at no charge; the $15 Metal Testing & Verification is for when you only want the answer. More in how to clean gold-plated jewelry.
What not to use on a gold chain
- Toothpaste, baking soda paste and gritty polishes. GIA advises against abrasives like those in some metal polishes or toothpaste. On a chain they also pack into the links and are hard to rinse out.
- Chlorine bleach and pool or hot tub water. GIA warns that chlorine and other bleaching agents can damage metal alloys. Take the chain off before you swim.
- Pins, needles and toothpicks to dig out grime. They scratch, and they can open a link. Soaking and a soft brush do the job.
- A home ultrasonic with a stone-set pendant attached. GIA notes that many gemstones can be damaged in an ultrasonic cleaner. See are ultrasonic cleaners safe for jewelry?
For gold jewelry in general, rings and pieces with stones included, see how to clean gold jewelry.
When a chain needs a jeweler, and what it costs
Send it in when grime stays packed in a rope or Cuban weave after a soak, when the chain is scratched rather than dirty, or when cleaning turns up a weak clasp or a link that looks thin or stretched. Prices from the live repair pages, Nov 18, 2026:
- Jewelry Spa: an ultrasonic bath to loosen what's between the links, steam to blast it out, a hand polish and a written inspection report. $71 for a 14K yellow gold chain ($44 + $12 + $10 + $5), $78 in 18K yellow ($44 + $12 + $10 + $12), $80 in 14K white ($44 + $12 + $19 + $5).
- Jewelry Polishing, for scratches a wash can't touch: $130 for a 14K yellow gold necklace ($30 + $75 + $17 + $8), $138 in 18K ($30 + $75 + $17 + $16), $75 for a 14K yellow gold bracelet ($30 + $20 + $17 + $8).
- Gold Plating for a plated chain that has worn through to coppery metal: a necklace is $223 on brass ($60 + $50 + $113) or $290 on copper ($60 + $50 + $180), and $110 on a sterling (vermeil) base ($60 + $50). Those are flash plating, the thinnest layer; a thicker 1 to 2 micron layer adds $250 and lasts longer on a chain worn every day.
- Repairs found along the way: Clasp Replacement from $48, Jump Ring Repair $31 in 14K yellow gold ($19 + $7 + $5), Chain Soldering $41 for one break in a solid 14K yellow gold cable or box chain ($30 + $7 + $4); rope adds $25, Cuban $38 and hollow links $20. A link that is thin or stretched but not broken is examined and quoted first through the $19 Mail-In Evaluation, credited in full. Every repair already includes a clean and polish.
Shipping is $30 round trip per order by UPS, with $100 of coverage each way. Your chain is photographed when it reaches the New York studio and again before it ships back, a bench jeweler does the work and a second jeweler checks it, under a 1-year workmanship guarantee. JewelryRepair.com is run by Sky Jewelry, family jewelers on Lenox Avenue since 1989, with over 50,000 repairs since 1989.
Questions
How do you clean a gold chain that turned black?
Can I put a gold chain in an ultrasonic cleaner?
Is it OK to wear a gold chain in the shower or pool?
How do I get dirt out of a rope or Cuban chain?
Can a jeweler make an old gold chain look new?
How can I tell if my gold chain is solid gold or plated?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list