Jewelry repair questions · Watches
Why does my automatic watch stop overnight?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Usually it has simply run down. Seiko rates its 4R automatics at about 41 hours fully wound and advises wearing them more than 10 hours a day; Longines notes a sedentary routine may not generate enough motion.
- Test it, don't guess: wind it fully, leave it still and time it against the maker's rated reserve.
- Runs to its rating? The watch is fine. Wind it at bedtime or wear it longer.
- Stops well short, even fully wound? A tired mainspring, a slipping bridle or old oil: overhaul work, priced below.
Prices
| Service | Price | What's included |
|---|---|---|
| Watch Overhaul | from $295 mechanical from $195 quartz | For a watch that falls well short of its rated reserve or stops on the wrist: the movement is taken out and disassembled, every part cleaned, the train, mainspring and jewels inspected for wear, then reassembled with the correct oils, regulated and resealed. Omega $310, Longines $315, Rolex $495 for a mechanical watch. Worn parts are flagged before anything proceeds. Can't be rushed. |
| Stem & Crown Replacement | from $75 | If the crown pulls out, spins freely or won't wind the watch: a new stem and/or crown with its gasket, with winding, setting and the date tested. TAG Heuer +$120, Rolex +$200. |
| Mail-In Evaluation | $19 | When the watch has more than one problem, or you want the whole piece looked over: examined with photos and an itemized quote, credited in full toward the work you approve. |
The overnight arithmetic
An automatic is a mechanical watch powered by a coiled mainspring, which a weighted rotor winds as your wrist moves. Whether it survives the night depends on two numbers: how much the spring can hold, which the movement sets, and how much your day actually put in.
- Capacity varies by movement. Wikipedia gives roughly two days as typical for a fully wound automatic; Seiko rates its 4R calibers at about 41 hours. Your manual or the caliber's specification gives your watch's figure.
- A day's wear may not fill it. Seiko's 4R instructions say to wear the watch more than 10 hours a day or, if it isn't worn, to wind it fully at a fixed time each day. Longines warns that a sedentary routine may not generate enough motion.
- Work it backward. Off at 10 p.m. and stopped by 6 a.m. means it had about 8 hours left at bedtime: a spring nowhere near full, whatever the rating.
The at-home power reserve test
- Wind it fully by hand, off your wrist. Unscrew the crown first if it screws down, then turn it clockwise; Longines suggests 20 to 30 turns. Extra turns can't overwind an automatic, because its mainspring slips once full (see can you overwind a watch?). Some automatics have no hand-winding at all; check your manual, and give those a full, active day on the wrist instead.
- Set the time and push the crown home (screw it down if it screws).
- Leave it still, dial up and away from phones and magnetic clasps, and note the time. When it stops, the gap is your watch's real power reserve.
Then compare it with the maker's figure:
- At or near the rating: the movement stores energy normally, and the overnight stops come from how the watch is worn.
- Well short of the rating: Wikipedia's mainspring and automatic-watch articles give three causes. An older mainspring deforms slightly and loses force. A bridle that grips the barrel too loosely slips before full wind, a defect called mainspring creep. And dried oil and dirt add friction until the spring can't drive the watch, which is why a neglected watch often stops with its spring fully wound. All three are Watch Overhaul work.
- Full reserve by hand, but it runs down on the wrist even after an active day: the rotor and the gearing that turns its swings into winding may not be doing their job. A rattling rotor is a related sign; see why an automatic watch rattles when shaken.
- The crown spins with no resistance and the watch won't start: see why won't my watch wind?
Two other reasons a watch stops at night
- The crown isn't fully home. Longines lists a crown that isn't pushed in properly among the causes of an automatic stopping. On watches that hack, a crown left in the time-setting position stops the watch on purpose, so a late adjustment can leave it looking dead by morning.
- Magnetism on the nightstand. Seiko's manual says magnetism affects the balance spring, so a magnetized watch may temporarily gain or lose time or stop. Seiko lists smartphones, tablets, AC adapters and magnetic bag buckles among everyday sources, and advises keeping a watch with no magnetic-resistance marking more than 5 cm from them. See is my watch magnetized? If it still stops or runs fast once it's kept away from magnets, book it through Start a Repair for the free diagnosis; you approve any work and its price first.
Fixes that don't need a watchmaker
- Wind it at a fixed time. Seiko's advice for a watch that isn't worn long enough is to wind it fully at the same time every day. A full wind at bedtime carries it through the night.
- Or let it stop. A New York watchmaker told Gear Patrol that unworn watches don't need to keep moving to protect their lubricants. Wind and set it when you next wear it, checking your manual before changing the date; see when not to change the date on a watch.
- A winder is optional. Omega says a winder can help keep the power reserve within specification; the watchmaker in Gear Patrol's piece calls one unnecessary, and says it wears an overdue watch's gears and pivots. If your watch fails the test above, a winder only hides the fault.
More on daily care in how to wind an automatic or manual watch.
When it needs a watchmaker, and what it costs
Send it in if it fails the reserve test, stops while you're wearing it, or gains or loses noticeably more than it used to. Prices from the live repair pages, Nov 18, 2026:
- Free diagnosis first. Book through Start a Repair and choose a watch that stops: it's diagnosed free, and nothing is done until you approve the work and its price. Decline, and it ships back with nothing more to pay, because the $30 round-trip shipping covers the return.
- Watch Overhaul: $295 for a mechanical watch of most brands ($195 + $100 for a mechanical movement); brand charges, such as Omega's $15, show before checkout. The movement is taken apart, cleaned, inspected, oiled, regulated and resealed, and worn parts are flagged first. Overhauls can't be rushed and take longer than the roughly three weeks most repairs take.
- Stem & Crown Replacement: from $75, if the crown pulls out, spins or won't wind.
- Mail-In Evaluation: $19, credited in full, when there's more than one problem.
JewelryRepair.com is an independent repair service, not affiliated with, authorized by or endorsed by any watch brand; makers are named here only as sources for their own published guidance. If your watch is under the maker's warranty or a service plan, check with the maker first, because an outside overhaul can void it.
Before you ship
- Write down your test result: how many hours it ran after a full wind, and whether it also stops on the wrist.
- Don't open the case back to look; a disturbed gasket lets moisture in.
- Insure what it's worth. Each way carries $100 of coverage; how full-value cover is priced is on the shipping and insurance page. The prepaid UPS label is in your account.
Questions
How long should an automatic watch run when you take it off?
Is it bad to let an automatic watch stop?
Why does my automatic watch stop while I'm wearing it?
How many hours a day do I need to wear an automatic watch?
How much does it cost to fix an automatic watch that won't hold a wind?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list