Jewelry repair questions · Chains, clasps & bracelets
My permanent bracelet broke. Can it be re-welded or fitted with a clasp?
From JewelryRepair.com: over 50,000 repairs since 1989 · 4.9 from 187 Google reviews (as of )
The short version
- Back on your wrist, welded shut: that's an in-person appointment at a permanent-jewelry studio, so ask the place that made it first.
- By mail, the fix is a clasp. A jeweler solders a clasp to one loose end and a closed ring to the other, so it becomes an ordinary bracelet you can take off.
- Other damage gets soldered. If the chain broke in two places, or a link is cracked, Chain Soldering closes it so only one opening remains.
- Pliers aren't a fix. A ring squeezed shut can pull open again.
- Keep every piece, including the tiny connecting ring, sealed in a small bag.
Prices
| Service | Price | What's included |
|---|---|---|
| Clasp Replacement | from $48 | Turns a clasp-less permanent chain into one you can take on and off: a clasp chosen for the chain's gauge and weight, soldered on and action-tested. Small spring ring: $48 in silver, $76 in 14K yellow gold ($48 + $28), $78 in 14K white gold ($48 + $30). The ring it closes onto is a separate item if it's missing (Jump Ring Repair); a free photo quote confirms the total first. |
| Chain Soldering | from $30 | Closes a second break or a cracked link so only one opening is left for the clasp, by torch solder (laser weld for hollow chains). $30 in sterling silver, $41 in 14K yellow gold ($30 + $7 + $4); a second break adds $17. |
| Jump Ring Repair | from $19 | The small ring at the end opposite the clasp, soldered into a closed loop or replaced if it was cut or lost when the chain broke. $19 in sterling silver, $31 in 14K yellow gold ($19 + $7 + $5). |
| Chain Shortening | from $44 | If the bracelet sits too loose once its clasp is on: links removed at the clasp end and the clasp re-soldered, with the removed links returned. $50 in 14K yellow gold ($44 + $6). |
How a permanent bracelet is made, and why it breaks
A permanent bracelet is a fine chain with no clasp. It's cut to fit your wrist, and the two ends are joined with a small jump ring welded shut while you wear it. AOL's guide to permanent jewelry describes that process, says most of the pieces it covers are solid 14K gold, and notes the chain can be cut off, best at the small connecting ring, and must come off for an MRI scan. For that side of it, see how to remove a permanent bracelet.
With no clasp to give way, the strain lands on a few points:
- The welded ring, the one joint made on your wrist rather than at a bench.
- A single fine link. Permanent chains are delicate by design, and dainty chains worn loose can snag.
- The fit itself. Gold is soft and relaxes over time, which is why fitters leave a couple of centimeters of room. Too much room and the chain catches; too little and it pulls.
Once the chain is open, a bench jeweler can't simply close it into a loop again: a bracelet sized to your wrist usually won't pass over your hand, which is exactly why it was welded on in the first place. That leaves two routes.
Route 1: have it welded back on in person
If you want it permanent again, take the chain, and the little ring if you found it, back to a permanent-jewelry studio with your receipt. Some studios re-weld for a small fee and some include a free reattachment with the purchase.
- Broken at the welded ring: the chain itself is intact, so a new connecting ring can be welded on.
- Broken at a link: the damaged link may have to come out, which makes the chain a little shorter. Check the fit before the weld.
- Chain damaged in more than one place, or a link cracked but not open: get the chain repaired first, then have it welded on. A mail-in jeweler can do that part: Chain Soldering closes the extra breaks and leaves one opening for the studio.
Route 2: add a clasp by mail
A clasp turns the chain into an ordinary bracelet you can take off for an MRI, travel or sleep. At JewelryRepair.com this is Clasp Replacement: the jeweler chooses a clasp matched to the chain's gauge and weight, so a fine chain gets a small spring ring it won't overwhelm, solders it on rather than pinching it closed, and tests the action.
- Spring ring or lobster. A small spring ring suits the fine chains used for permanent bracelets: $48 in silver, $76 in 14K yellow gold ($48 + $28), $78 in 14K white gold ($48 + $30), $81 in 18K yellow gold ($48 + $33). A small lobster clasp in 14K yellow gold is $67 ($48 + $19).
- The other end needs a ring. The clasp closes onto a small ring at the opposite end. If the original welded ring was cut or lost when the chain broke, a new one is Jump Ring Repair, $31 in 14K yellow gold ($19 + $7 + $5), soldered closed. On Ganoksin's Orchid forum, working jewelers advise soldering every jump ring in precious-metal work, and one notes that pieces hung on unsoldered rings get caught and pulled off.
- Match the metal. A solid 14K chain should get a 14K clasp. Gold-filled chains, stamped GF or 1/20, are a layer of karat gold bonded to a base metal, at least 1/20 of the metal's weight under the FTC's Jewelry Guides, not solid gold. The clasp options are listed in silver and solid gold, so ask for a free quote first.
- Mind the length. The clasp and ring add a little length. Tell the jeweler your wrist measurement; if it's still too loose, Chain Shortening takes links out at the clasp end and returns them to you. See how tight a bracelet should be.
- Get a quote first. Send photos through the on-site chat or the contact page for a free itemized quote within 1 business day. Nothing ships until you've seen the price.
What it costs at JewelryRepair.com
Prices from the live repair pages, Nov 18, 2026. Each includes a clean and polish and the 1-year workmanship guarantee, which covers a solder joint that reopens.
- Chain Soldering, one break: $30 sterling silver; $41 14K yellow gold ($30 + $7 + $4); $48 14K white gold ($30 + $14 + $4). A second break adds $17.
- Jump Ring Repair: $19 sterling silver; $31 14K yellow gold.
- Chain Shortening: $50 in 14K yellow gold ($44 + $6).
- Not sure what's left to work with: the $19 Mail-In Evaluation, credited in full.
Worked example: a 14K yellow gold permanent bracelet that snapped in two places, rebuilt with one break soldered and a spring ring fitted at the other: $41 + $76 = $117. If the end ring was lost too, add Jump Ring Repair at $31, for $148. Round-trip shipping is $30 per order, with $100 of coverage each way; covering a $500 bracelet in full costs $10 (2.5% of the $400 above $100).
Before you ship
- Bag every piece, including the tiny connecting ring, in a small sealed bag inside the package.
- Say what it's made of if you know; if not, say so, and the metal is confirmed on arrival before the price is set.
- Add your wrist measurement and whether you want a spring ring or a lobster clasp to your order note.
Your bracelet is photographed when it arrives at the New York studio and again before it ships back, so you can check that every piece came home.
Questions
Can a permanent bracelet be welded back on after it's cut off for an MRI?
Why did my permanent bracelet break?
Can I close the jump ring on my permanent bracelet with pliers?
Is it worth adding a clasp to a permanent bracelet?
Can a gold-filled permanent bracelet be repaired?
Related
JewelryRepair.com · Over 50,000 repairs since 1989
More repair questions · Repair glossary · How online jewelry repair works · Full price list